Electrical Panel Upgrade Cost: 100 to 200 Amp Prices

Electrician inspecting a residential breaker box inside a home

Photo by Kathleen Austin Kuhn on Pexels

Updated November 12, 2026 · By Michael Gonzales · Prices from Angi and HomeGuide, checked November 12, 2026

Disclosure: 1-800Deals is a contractor directory. We may earn a commission from some affiliate links on this site, at no extra cost to you. Listings never change the facts or prices on this page.

Short answer: An electrical panel upgrade costs about $1,200 to $2,000 for most homes in 2026, and Angi puts the national average at $1,600. Going from 100 to 200 amps runs $1,300 to $2,000 on Angi's figures. If the meter, service wires or utility hookup also have to change, HomeGuide prices a new 200-amp service panel at $1,800 to $2,500.

Compare local electricians, or let us match you with one. We also list electricians in San Francisco, Chicago and Minneapolis.

How much does an electrical panel upgrade cost in 2026?

Most panel upgrades land between $1,200 and $2,000. Angi's 2026 guide (updated October 29, 2026) puts the average at $1,600 and says amperage, panel location and any new wiring or drywall repair drive the spread. HomeGuide's ranges are close for a straight swap and higher when a new service panel is needed.

SourceJobTypical cost
Angi (2026)Panel upgrade, all sizes$1,200 to $2,000; $1,600 average
HomeGuide60 to 100 amps$850 to $1,100
HomeGuide100 to 200 amps$1,300 to $1,600
HomeGuideNew 200-amp service panel$1,800 to $2,500
HomeGuide200 to 400 amps$2,000 to $4,000

Swipe to see more

The panel itself is a small part of the bill. HomeGuide found 200-amp panels at home improvement stores from $41 for a 16-space box to $387 for a 42-space box. Labor, permits and the work outside the panel are what you're really paying for.

How much does it cost to upgrade from 100 to 200 amps?

Plan on $1,300 to $2,000 for a 200-amp panel with installation, per Angi's 2026 amperage table. HomeGuide puts the same upgrade at $1,300 to $1,600, or $1,800 to $2,500 when a new service panel is required.

Panel sizePanel only (Angi 2026)Panel plus install (Angi 2026)
100 amps$100 to $200$800 to $1,500
150 amps$150 to $250$1,300 to $1,600
200 amps$250 to $350$1,300 to $2,000
300 amps$350 to $500$1,800 to $3,500
400 amps$500+$2,000 to $4,000

Swipe to see more

Confirm one detail in every quote. Angi notes that a new 200-amp panel won't deliver 200 amps if the exterior service wire and meter box are still rated for 100 or 150 amps; those need upgrading too. Angi also says a 100-amp panel can't become a 200-amp panel by swapping breakers. The box gets replaced, and the service coming into the house usually changes with it, which means scheduling with your utility.

What else can add to the bill?

Permits, meter work and old wiring are the usual add-ons. Angi's 2026 figures for the extras:

Add-onAngi (2026)
Permit$50 to $300 (most electricians include it in the quote)
Electric meter box install or replacement$200 to $800
Subpanel install$400 to $1,750
Fuse box replacement$200 to $2,000
Rewiring an electric panel$500 to $4,500
Rewiring inside walls$1,500 to $12,000
Moving the panel farther from the service pointAbout $300 more in wiring

Swipe to see more

Labor is the biggest line. Angi puts electrician labor at $40 to $250 an hour for four to eight hours of panel work. HomeGuide says a typical replacement takes 8 to 10 hours.

Do you need a bigger panel or just more space?

Not every "my panel is full" problem needs more amps. A subpanel adds breaker slots, but it doesn't add capacity to the service coming into the house. If you're adding a heat pump, an EV charger, an electric range or a heat pump water heater, ask the electrician to run a load calculation first. NEC Article 220 is the part of the electrical code that covers service load calculations, and a written result tells you whether you need 200 amps or whether your current service can carry the new load.

Ask each electrician the same three questions so quotes compare cleanly:

  1. Does the price include the meter base, service wires and utility coordination?
  2. Who pulls the permit, and is the inspection included?
  3. What happens if the old wiring or grounding isn't up to code?

Check licensing before you sign. Our contractor license lookup by state shows where to verify an electrician.

Are there rebates for an electrical panel upgrade?

Sometimes, and mostly when the panel is needed for an electric upgrade. The federal HEAR program caps panel rebates at $4,000 for eligible lower- and moderate-income households, but only in states that have opened their programs; our HEAR and HOMES rebates by state guide tracks that. For panels installed in 2025, the 25C tax credit covered 30% up to $600 when the panel enabled qualifying equipment. Our 2026 energy credit guide explains what changed.

Utilities run their own programs too. Check the ZIP code rebate finder before you sign, and if the panel is part of a heat pump project, read heat pump rebates next.

Ready to compare quotes? Get matched with an electrician.

Frequently asked questions

How much does it cost to upgrade from 100 to 200 amps? Angi puts a 200-amp panel with installation at $1,300 to $2,000 in 2026. HomeGuide lists $1,300 to $1,600, or $1,800 to $2,500 if a new service panel is needed.

Is $5,000 too much for a panel upgrade? It's above the national ranges for a panel swap, but it can be fair when the job includes new service wires, a meter base, underground work or rewiring. Ask for an itemized quote and compare it with two others for the same scope.

How long does an electrical panel upgrade take? Angi estimates four to eight hours of labor for the panel work, and HomeGuide says 8 to 10 hours. Utility disconnect, inspection and any rewiring can add days to the schedule.

Do I need a permit to replace an electrical panel? Yes, in most places. Angi says panel replacement requires a permit that costs $50 to $300. Who can pull it varies by city, so check with your local building department.

Can I replace an electrical panel myself? It's not a DIY job. The work involves the utility service connection, and many jurisdictions only issue panel permits to licensed electricians. Check your local rules and hire a licensed pro.

How much does a 400-amp panel upgrade cost? Angi lists $2,000 to $4,000 for a 400-amp panel with installation. HomeGuide's 200-to-400-amp upgrade range is also $2,000 to $4,000.

Sources

Angi: Cost to upgrade an electrical panel (updated Oct 29, 2026) · Angi: How to upgrade your electrical panel · HomeGuide: Cost to replace an electrical panel · 1-800Deals: HEAR and HOMES rebates by state. Checked November 12, 2026.