Photo by Jaymantri on Pexels
Updated Oct 30, 2026 · By Michael Gonzales · Prices from Angi and HomeGuide; treatment guidance from the EPA and University of Minnesota Extension
Disclosure: 1-800Deals is a contractor directory. We may earn a commission from some affiliate links on this site, at no extra cost to you. Listings never change the facts or prices on this page.
Short answer: Professional bed bug treatment costs about $1,000 to $4,000 for most homes in 2026, and Angi puts the national average at $2,500. Heat runs $1 to $3 per square foot and is more likely to finish in one visit. Chemical treatment runs $2 to $5 per square foot but usually takes two or three visits.
Compare local pest control companies, or let us match you with an exterminator. Browse by state: New York, California, Texas, Florida and Illinois.
How much does bed bug treatment cost in 2026?
The two biggest cost guides land in the same range:
| What you're paying for | Angi, Oct 2026 | HomeGuide |
|---|---|---|
| National average | $2,500 | Not listed |
| Typical job | $1,000 – $4,000 | $300 – $500 (one room) to $5,000 (severe, whole home) |
| One room | $300 – $650 (one bedroom) | $300 – $500 |
| Whole home | $1,500 – $6,200 | $2,500 – $5,000+ |
| Per room | $200 – $400 | Not listed |
| Per square foot | $4 – $7.50 | $1 – $8, by method |
Swipe to see more
Sources: Angi, bed bug extermination cost (updated Oct 11, 2026) and HomeGuide, bed bug exterminator cost.
Where you live matters. Angi says treatment in big cities can cost up to three times more than in rural areas, and an emergency visit adds $200 to $500.
Heat vs. chemical bed bug treatment: which costs less?
Chemical treatment is usually cheaper per visit. Heat often costs more up front, but it's more likely to finish in one visit, so the totals can end up closer than the per-foot prices suggest. Here's how the two compare:
| Heat treatment | Chemical treatment | |
|---|---|---|
| Price per sq ft (Angi and HomeGuide) | $1 – $3 | $2 – $5 |
| Visits needed (UMN Extension) | One is more likely to be enough | 2 – 3 visits |
| Time per visit (UMN Extension) | 6 – 8 hours for the home | 30 minutes – 2 hours per room |
| Kills eggs | Yes, at the right temperature | Not reliably, so visits repeat |
| Protection after treatment | None on its own | Residual insecticide keeps working |
| Prep | Remove heat-sensitive items and pets | Clear access to furniture, baseboards and outlets |
Swipe to see more
Sources: Angi, HomeGuide and University of Minnesota Extension, bed bug prevention and control.
How heat works. A crew brings in heaters and raises the home's temperature while remote thermometers track hot and cool spots. UMN Extension says bed bugs and their eggs die within 90 minutes at 118°F, or right away at 122°F, and that room air during treatment is usually 135°F to 145°F.
The EPA says items or rooms should reach at least 120°F for 90 minutes to make sure eggs die.
Why chemical jobs need repeat visits. Eggs are hard to kill with insecticide. HomeGuide says they hatch in 6 to 9 days, so most homes need two to three treatments spaced one to two weeks apart.
UMN Extension says a thorough job uses three kinds of product: a fast-acting contact spray, a residual insecticide for cracks and furniture, and a dust for voids like outlets and baseboards.
Why many companies combine them. Heat leaves nothing behind, so the home can be reinfested. UMN Extension says companies often add a residual insecticide around the treated area. HomeGuide puts heat plus pesticide at $2 to $4 per square foot.
Terminix says chemical treatment "may be more budget-friendly" but usually needs several visits, while heat often costs more up front because of the equipment.
Heat isn't available everywhere. Orkin notes that rural areas may have limited access to heat treatment, which can leave chemical as the only practical choice.
How much does a bed bug heat treatment cost by home size?
HomeGuide prices whole-home heat treatment by square foot:
| Home size | HomeGuide heat treatment cost |
|---|---|
| 1,000 sq ft | $1,000 – $3,000 |
| 1,500 sq ft | $1,500 – $4,500 |
| 1,800 sq ft | $1,800 – $5,400 |
| 2,000 sq ft | $2,000 – $6,000 |
| 2,500 sq ft | $2,500 – $7,500 |
| 3,000 sq ft | $3,000 – $9,000 |
| 4,000 sq ft | $4,000 – $12,000 |
Swipe to see more
Source: HomeGuide, bed bug heat treatment cost. Heat only, before any added insecticide.
If the bugs are only in one or two rooms, you may not need the whole house heated. Ask whether the company can treat just the affected rooms and inspect the rest.
How much does bed bug treatment cost per room?
Most jobs cost less per room as they get bigger:
| Rooms treated | Angi (bedrooms) | HomeGuide |
|---|---|---|
| 1 room | $300 – $650 | $300 – $500 |
| 2 rooms | $700 – $1,000 | $750 – $900 |
| 3 rooms | $1,050 – $1,450 | $1,100 – $1,300 |
| 4 rooms | Not listed | $1,500 – $1,700 |
Swipe to see more
Sources: Angi (Oct 2026) and HomeGuide.
Angi puts chemical treatment alone at $270 to $775 per room. A single visit runs $415 to $625, and a follow-up visit costs $75 to $225.
What else can show up on a bed bug bill?
Ask for each of these as its own line item:
| Item | Typical cost | Source |
|---|---|---|
| Visual inspection | $65 – $200, often free | Angi, HomeGuide |
| Bed bug sniffing dog | $300 – $600 | Angi, HomeGuide |
| Follow-up visit | $75 – $225 | Angi |
| Emergency or same-day service | $200 – $500 extra | Angi |
| Steam treatment | $2 – $7.50 per sq ft | Angi |
| Freezing | $3 – $6 per sq ft | Angi, HomeGuide |
| Fumigation | $4 – $8 per sq ft | Angi, HomeGuide |
Swipe to see more
The size of the infestation changes the price the most. Angi puts a mild case at $100 to $1,000, a moderate one at $1,000 to $2,500 and a severe one at $4,000 to $6,000. HomeGuide's ranges are lower: $300 to $500, $700 to $1,300 and $1,500 to $5,000. Fumigation is the rare, top-end option.
Terminix says only a limited number of its branches offer it, and Angi says fumigating a large building can top $50,000.
How many treatments does it take to get rid of bed bugs?
Usually two to three for chemical treatment, and often one for heat. UMN Extension says a thorough insecticide job takes two or three visits, because one round rarely kills every bug. Angi puts the typical schedule at two to four visits over three to six weeks.
With heat, UMN Extension says one treatment is more likely to be enough, but a retreatment may be needed if some spots didn't get hot enough or bugs come back in. It says that if three weeks pass after the last treatment with no new signs, the problem is likely under control.
Make sure your quote says how many visits are included. A low first-visit price can grow once follow-ups are added.
Is heat treatment for bed bugs 100% effective?
No method is guaranteed. HomeGuide says heat kills about 95% of bed bugs and that cooler spots, such as near pipes or foundations, can let some survive. That is why many companies place thermometers throughout the home and add a residual insecticide. Ask what happens if bugs turn up after the job, and get the answer in writing.
Can you sleep in your room after bed bug treatment?
Follow the re-entry time your exterminator gives you. Angi says to stay out of treated rooms for at least four to five hours. UMN Extension says to wait until all insecticides have dried, or until the company says it's safe. After a heat job, rooms need time to cool down before you go back in.
Can you treat bed bugs yourself?
You can do part of it, but the experts say not to rely on it. Angi says DIY treatment costs under $100. University of Minnesota Extension says most people can't control bed bugs on their own and recommends a professional.
What helps: - Your dryer. The EPA says to dry bedding and clothes on high heat for 30 minutes. Washing alone generally won't kill bed bugs. - Encasements. The EPA and UMN Extension both recommend zippered mattress and box spring encasements. They trap bugs inside and make the bed easier to check.
One example is the SafeRest zippered mattress encasement (4.6 stars from more than 17,000 ratings on Amazon when we checked).
Match the size and depth to your mattress. - Interceptors. Cups placed under bed and sofa legs, such as ClimbUp interceptors, catch bugs climbing up and show whether treatment worked.
What doesn't: The EPA warns against trying to heat your home with the thermostat, a propane space heater or a fireplace. It says that doesn't work and is dangerous. UMN Extension says hardware-store foggers don't control bed bugs. The EPA adds that home freezers often aren't cold enough.
Items need three days in a sealed bag at 0°F, checked with a thermometer.
Who pays for bed bug treatment?
Renters: UMN Extension says to tell your landlord right away, and that the landlord or property manager should work with a pest professional. Terminix notes that apartment treatments often need coordination with neighbors and building management, because bugs move between units. Landlord rules vary by state and city, so check your lease and local law.
Homeowners: Insurance generally won't help. Policygenius says homeowners insurance doesn't cover bed bugs or other infestations, because they're treated as a maintenance issue.
There's no energy rebate for pest control either. If you're also planning upgrades like insulation or a heat pump, our rebate finder by ZIP code shows what's available where you live.
How do you get a fair bed bug treatment quote?
- Get at least three written quotes. Ask each company to inspect first and name the method it plans to use.
- Compare the total, not the first visit. Ask how many visits the price includes and what each extra follow-up costs.
- Ask about heat plus insecticide. UMN Extension suggests asking whether a heat job includes a supplemental insecticide.
- Check the license. UMN Extension says many states require a license to apply the insecticides that kill bed bugs. Use our contractor licensing lookup.
- Get the plan in writing. UMN Extension says it should list the products or methods, prep instructions, and start, end and follow-up dates. You can ask for the product labels and safety data sheets.
- Follow the prep list. UMN Extension says poor prep is one of the main reasons treatments fail.
- Ask about guarantees. Find out whether re-treatment is free if bugs come back, and for how long.
Want us to find exterminators for you? Get matched with local pest control companies. For other pests, see our pest control cost guide and termite treatment cost guide.
Frequently asked questions
How much does a bed bug exterminator cost? About $1,000 to $4,000 for most homes, per Angi, with a national average of $2,500. One room costs about $300 to $650.
How much does bed bug heat treatment cost? $1 to $3 per square foot, or about $2,000 to $6,000 for a 2,000-square-foot home, per HomeGuide.
How much does Orkin charge for bed bug treatment? Orkin doesn't post prices online and quotes after an inspection. HomeGuide reports Orkin bed bug jobs at $300 to $5,000.
What kills bed bugs 100%? No single method is guaranteed. Heat comes closest when every spot gets hot enough. UMN Extension says bed bugs and eggs die within 90 minutes at 118°F, or right away at 122°F.
How long does a bed bug heat treatment take? Six to eight hours for most homes, per UMN Extension. HomeGuide says six to nine hours.
Does homeowners insurance cover bed bugs? No. Policygenius says standard homeowners policies exclude bed bugs and other pest infestations.
Sources
Angi: How much does bed bug extermination cost? (updated Oct 11, 2026) · HomeGuide: Bed bug exterminator cost · HomeGuide: Bed bug heat treatment cost · University of Minnesota Extension: Bed bug prevention and control in the home · EPA: Controlling bed bugs using integrated pest management · EPA: Do-it-yourself bed bug control · Terminix: Bed bug treatment cost · Orkin: Cost of bed bug extermination service · Policygenius: Does homeowners insurance cover bed bugs?. Checked October 28, 2026.